Denon DVD-2910 Operating Instructions Manual

Also see for DVD-2910: Operating instructions Specifications Supplementary guide Service manual Operating instructions

20ENGLISH3B When “MULTI CHANNEL” is selected, use the • and ªcursor buttons to select the item to be set, then press theENTER button.SPEAKER CONFIGURATIONUse this to select the types of the different speakers.CHANNEL LEVELUse this to adjust the output level of the differentspeakers.DELAY TIMEUse this to set the distance from the different speakers tothe listening position.✽ To exit the SPEAKER SETUP modeUse the ª cursor button to select “AUDIO SETUP” thenpress ENTER button.✽ The SPEAKER CONFIGURATION settings only apply toanalog outputs.B When “SPEAKER CONFIGURATION” is selected, use the• and ª cursor buttons to select the speaker to be setthen press the ENTER button.• The type of speaker used for the front speakers, centerspeaker, subwoofer and surround speakers can be set.Use the • and ª cursor buttons to select the speakertype, then press the ENTER button.LARGESelect this when a large speaker is connected.SMALLSelect this when a small speaker is connected.NONESelect this when no speaker is connected.YESSelect this when a subwoofer is connected.NOSelect this when no subwoofer is connected.✽ Press the RETURN button to return to the “SPEAKERSETUP” menu.B When “CHANNEL LEVEL” is selected, use the • and ªcursor buttons to select the speaker to be adjusted, thenuse the 0 and 1 cursor buttons to set the level.TEST TONE• Use the 0 and 1 cursor buttons to select auto ormanual.Adjust so that the volume of the test tones output fromthe different speakers sounds the same.• The volume level output from the front speakers (leftand right channels), center speaker, surround speakers(left and right channels) and subwoofer can be adjusted.• The volume level can be adjusted between 0 and -10 dBin steps of 1 dB.• Settings SW + 10 dB to “ON” increases by 10 dB thevolume level that is output from the subwoofer.✽ Press the RETURN button to return to the “SPEAKERSETUP” menu.Remote control unitRemote control unit Remote control unitSPEAKER SE TUPSPEAKER CONF I GURAT I ONCHANNE L L EVE LDE L AY T I M EAUD I O SE TUPDEC I S I ON : ENTER BUT TONSE L ECT :SPEAKER SE TUPSPEAKER CONF I GURAT I ONF RONT SPCENT ER SPSUBWOOF ERSURROUND SPL ARGEL ARGEYESL ARGEDEC I S I ON : ENTER BUT TONSE L ECT :SPEAKER SE TUPCHANNEL LEVELDEC I S I ON : ENTER BUT TONSE L ECT :TEST TONEF RONT L CHCENT ERF RONT RCHSURROUND RCHSURROUND L CHSUBWOOF ERS W + 1 0 d BOF F0 dB0 dB0 dB0 dB0 dB0 dBOFF3B When “DELAY TIME” is selected:With 5.1-channel surround sound, ideally the distancebetween the listening position and all the speakersaside from the subwoofer should be the same. Thedelay time setting can be used to make the soundfrom the different speakers reach the listening positionat the same time.Use the • and ª cursor buttons to select the settingitem, then press the ENTER button.• When “DISTANCE” is selected:METERS (when the 0 cursor button is pressed):The unit of distance is set to meters (“m”).FEET (when the 1 cursor button is pressed):The unit of distance is set to feet (“ft”).• When “FRONT LCH”, “FRONT RCH”, “CENTER”,“SURROUND LCH”, “SURROUND RCH”,“SUBWOOFER” is selected:Use the 0 and 1 cursor buttons to set the distancefrom the listening position to the different speakers.✽ The distance can be set within the range of 0 to18 meters (60 feet).✽ The maximum difference in speaker distance forwhich adjustment is possible is 4.5 meters (15feet).• When “DEFAULT” is selected:When “DEFAULT” is selected and the ENTER buttonis pressed, all the items are restored to their factorydefault settings.✽ When digital connections are made with an AV amplifier,make the speaker settings on the AV amplifier.For DVD audio discs, the disc’s settings are givenpriority, so the sound may not be produced as set withthe above speaker mode setting.✽ Press the RETURN button to return to the “SPEAKERSETUP” menu.The SRS TruSurround function (only for DVD-videos and Video CDs)2 The multi-channel sound normally achieved with fivespeakers is recreated using only the two front stereospeakers. This results in a sound with a nearly naturalsense of movement that seems to surround the head,without the strong directivity characteristic of multi-speaker systems.Remote control unitRemote control unit Remote control unitSPEAKER SE TUPDELAY TIMEDEC I S I ON : ENTER BUT TONSE L ECT :D I STANCEF RONT L CHCENT ERF RONT RCHSURROUND RCHSURROUND L CHSUBW OOF ERDE F AUL T ONMETERS3.6 m3.6 m3.6 m3.6 m3.0 m3.0 mSPEAKER SE TUPDELAY TIMEDEC I S I ON : ENTER BUT TONSE L ECT :D I STANCEF RONT L CHCENT ERF RONT RCHSURROUND RCHSURROUND L CHSUBW OOF ERDE F AUL TMETERSON3.6 m3.6 m3.6 m3.6 m3.0 m3.0 mSPEAKER SE TUPDELAY TIMEDEC I S I ON : ENTER BUT TONSE L ECT :D I STANCEF RONT L CHCENT ERF RONT RCHSURROUND RCHSURROUND L CHSUBW OOF ERDE F AUL T ONMETERS3.6 m3.6 m3.6 m3.6 m3.0 m3.0 mSPEAKER SE TUPDELAY TIMEDEC I S I ON : ENTER BUT TONSE L ECT :D I STANCEF RONT L CCCENT ERF RONT RCHSURROUND RCHSURROUND L CHSUBW OOF ERDE F AUL T ONMETERS3.6 m3.6 m3.6 m3.6 m3.0 m3.0 m