Eaton i-on Compact Administration And User Manual

Also see for i-on Compact: User guide Quick setup guide Administration and User Manual Administration and User Manual

Contents

Page 7Chapter 2: Setting and UnsettingIntroductionReadying the system to start an alarm when someone moves into aprotected area is called “setting” the system. Disarming the system so thatpeople can move freely is called “unsetting” the system.You can set and unset your system using a variety of different methods,depending on how the installer has configured your system. This chapterexplains typical methods used.Note: The control unit can monitor some detectors continuously,irrespective of whether the system is set or unset. For example: Fire and smoke detectors, flood sensors, Hold Up Alarm buttons oremergency exits. Monitors for machinery (for example freezers) or other type of“technical alarm”.Setting and unsetting from the control unitThis section explains how to set and unset your system from the keypad onthe control unit. If you are using a one-way radio keypad (which has nodisplay), please refer to page 14.Note: Figure 2 on page 3 gives an overview of each key.Setting from the control unitWith the standby screen displayed:1. Enter your access code or present your proximity tag to the keypad. Ifyou enter your access code, the display shows a “*” for eachcompleted digit: