Eaton i-on Compact Administration And User Manual

Also see for i-on Compact: User guide Quick setup guide Administration and User Manual Administration and User Manual

Contents

User Menu OptionsPage 37System configurationThe System Config menu allows you to change some parts of the systemto suit your particular needs.Note: For normal users, the System Config menu contains only the Chimeand Level 4 Update options (see below).Switching facilities on/offSystem Config – Facilities On/Off can be used to switch the followingfacilities on or off:Chime Use this option to enable or disable the chimes thatoccur when a zone is triggered that has a Chimeattribute (as set up by the installer). For most zonetypes, a chime occurs only when the system is unset.Remote Access A master user can use this option to enable or disableremote access to the control unit from the web interfaceor SecureConnect.Note: By default, this feature is off for security reasons.Make sure that any installer requesting access is yourauthorised installer. Switch off remote access once theinstaller has finished.Level 4 Update Use this option to enable or disable access to thecontrol unit from the level-4 user. There can be only onelevel-4 user, which only the installer can create.The level-4 user is able to:a) Update the firmware and language files at the controlunit using the web interface.b) Log into the user menu or web interface and changethe level-4 user name and code.The level-4 user cannot perform other tasks, such as toset or unset the system, omit zones, etc.To switch facilities on or off:1. Select System Config – Facilities On/Off .2. Use  or  to choose the facility, then  or  to switch it on or off.3. Press .