Eaton i-on Compact Administration And User Manual

Also see for i-on Compact: User guide Quick setup guide Administration and User Manual Administration and User Manual

Contents

User Menu OptionsPage 40operate (use  or  to display each day, then  or  tochoose Yes or No).Note: If a user activates the output while it is deactivated,the output stays activated until the control unit reaches thenext off time. If a user de-activates the output while it isactivated, the output deactivates until the control unitreaches the next on time.Leave On Time, Off Time and Days without values if youwant the output to act as a simple on/off switch.Press  when you have finished editing On Time/OffTime/Days.Managing remote controlsMaster users can use System Config – Remotes to specify the functionsthat can be carried out using remote controls. The System Config –Remotes menu contains the following options (see the next sections forfurther details):Edit Used to edit the programming of the buttons, such asthe buttons used to set or unset the system, or operateoutputs.Delete Deletes a selected remote control.Delete All Deletes all remote controls.Unset Enables or disables the ability for all remote controls tounset the system.HUA Function Enables or disables the ability for remote controls togenerate Hold-Up Alarms (HUAs).Editing the programming of the buttonsYou can use System Config – Remotes – Edit to re-program buttons on aone-way remote control, or the “*” button on a two-way remote control, afterthe devices have been assigned to a user.A button can be programmed to: Set a selected part set. Operate an output configured as "User Defined" by the installer.