Eaton i-on Compact Administration And User Manual

Also see for i-on Compact: User guide Quick setup guide Administration and User Manual Administration and User Manual

Contents

User Menu OptionsPage 39IP Address The recipient's IP address.Press  when you have finished editing the setting, and if required,select another setting to edit.4. Press  several times to exit.Editing outputsMaster users can use System Config – Edit Outputs to edit the on and offtimes of any output the installer has configured as "User Defined".Note: Master and normal users can activate or deactivate user-definedoutputs at any time (see page 43).To edit an output:1. Select System Config – Edit Outputs.The first output you are able to edit is displayed:2. Press  or  followed by  to select the output you want to edit.3. Press  or  followed by  to select the setting to change:Name You can edit the name of the output. See page 24 fordetails of how to enter text.Latched Use  or  followed by  to select Yes or No. When setto No, the output changes state when activated, but thenreturns to the normal state again after the period specifiedby On Time (see below). When set to Yes, the outputchanges state every time a user operates the output, oraccording to a schedule if you specify On Time, Off Timeand Days (see below).On Time/Off Time/DaysIf Latched is set to No, use On Time to specify the numberof seconds you want the output to remain active. If youspecify zero seconds, the output will not operate.You can use On Time, Off Time and Days to specify aschedule for the output to activate and deactivateautomatically. Use On Time and Off Time to specify thetime you want the output to activate and deactivate. UseDays to specify the days of the week you want the output to