RESTRICTED USE ONLY Fargo Electronics, Inc.HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 2-1Section 2: SpecificationsThe purpose of this section is to provide the User with specific information on the RegulatoryCompliances, Agency Listings, Technical Specifications and Functional Specifications for theHDP600, HDP600-LC, HDP600 CR100 and HDP600-LC CR100 card Printers.Table of ContentsSection 2: Specifications 2-1Table of Contents 2-1Safety Messages (review carefully) 2-2Introduction 2-3Reviewing the HDP600 Printer Overview table 2-3Reviewing the HDP600 Package 2-4Reviewing the HDP600 (front) 2-4Reviewing the HDP600 CR100 Card Printer 2-5HDP600 - Regulatory Compliances 2-6HDP600 - Agency Listings 2-6Technical Specifications 2-7Technical Specifications (continued) 2-8Technical Specifications (continued) 2-9Technical Specifications (continued) 2-10Technical Specifications (continued) 2-11Technical Specifications (continued) 2-12Technical Specifications (continued) 2-13Functional Specifications 2-14Printer Components: Resin Thermal Transfer to USB Interface Port 2-15Printer Components: Resin Thermal Transfer to USB Interface Port (continued) 2-16Printer Components: LCD and Softkey Control Pad 2-17Printer Components: LCD and Softkey Control Pad (continued) 2-18Printer Components: LCD and Softkey Control Pad (continued) 2-19Printer Components: LCD and Softkey Control Pad (continued) 2-20Printer Components: LCD and Softkey Control Pad (continued) 2-21Printer Components: Print Ribbons 2-22Printer Components: Blank Cards 2-23Printer Components: Card Input and Output Hoppers 2-24Printer Components: Card Output Hopper and Reject Hopper 2-25Printer Unit: Reviewing the Card Lamination Module 2-26Printer Components: Transfer Roller 2-27Reviewing the Overlaminates 2-28Reviewing the Thermal Transfer Film and PolyGuard Overlaminates 2-28Reviewing the CR-90 or CR-100 Patch Size 2-29Reviewing the Overlaminate Design 2-29
