RESTRICTED USE ONLY Fargo Electronics, Inc.HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 7-46Using the K Panel Resin tabUse this tab to adjust the CR-80 Card Size, the Direction the Card Travels through thePrinter, the Print All Black With K Panel (options) and the Defined Areas. Use this tab tocontrol where the resin black (K) Panel of a full-color Ribbon is printed. (Note: The HDP600CR100 Printing Preferences window has the same K Panel Resin tab functionality as theHDP600 Printing Preferences window.) If printing with a Ribbon type that does not have a K Panel, such as the YMC Ribbontype, all K Panel Resin options will be grayed out. Resin black text is desirable due to itssharp, saturated color and resin black barcodes are required to ensure readability whenscanned by an infrared barcode reader. (Note: The Printer Driver will automatically printall TrueType black text and TrueType barcodes only with the resin black (K) Panel of thePrint Ribbon by default.) If printing black text or barcodes that are not TrueType fonts or black graphics, select oneof the three options listed under Print All Black With K Panel (see the procedurebelow). The Printer Driver will print areas of the image where it finds black coloring withthe Print Ribbon's resin black (K) Panel as specified by each of the following options.
