RESTRICTED USE ONLY Fargo Electronics, Inc.HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 16-1Section 16: IndexAAbout button, 7-23absolute failure, 7-9AC - Alternating Current, 15-1accelerated wear/dye migration, 7-7Accepted Card Compositions, 2-8Accepted Card Thickness, 2-8Access Card, 15-1adhesion, 7-9Adhesion, 15-1adhesives, 7-5Adjust Image Position controls, 7-43Adjusting Card Thickness Lever, 7-4Adjusting Lamination Sensor Calibration, 11-27Adjusting Lamination Temperature Setting, 11-27Adjusting the Flipper Offset, 11-24Adjusting the LAM TOF and EOF, 11-26Adjusting the Lamination Flipper Offset, 11-25Agency Listings, 2-6Algebraic, 7-28, 15-1all Printers share all print jobs, 7-36ANSI (American National Standards Institute), 15-1Appropriate HDP Printer Driver Settings, 7-6AS400, 15-1ASCII (American Standard Code for InformationInterchange), 15-1AT, 15-1Attention screen, 2-21Auto Eject 1st Error option, 7-62auto eject option, 7-62BB (Black), 15-1Barcodes, 15-2batch print, 15-2batch printing, 7-62Battery Back-up, 15-2Bi-directional, 15-2BIOS (Basic Input/Output System), 15-2Bit, 15-2Bit map, 15-2black graphics, 7-47black text or barcodes, 7-47Board, 15-2Boot-up, 15-2Buffer, 15-2CCable, 15-2Cache, 15-3Calibrating, 15-3Can’t Find Card Error, 4-3Cancel button, 2-19Cancel Prompt, 4-2Cancel soft key, 7-62Card Capacity, 2-8Card Cleaning Assembly, 2-16Card Count, 4-19Card Design, 2-23card grid, 7-50Card Hopper Jam, 4-2Card Illustration, 7-43Card Input Guide adjustment, 6-6, 7-10, 7-11Card Input Hopper, 2-15, 2-24, 2-25Card JamFlipper, 4-3Lam, 4-3Card Jam, 4-3Card Output Hopper, 2-15Card Size, 2-23, 7-13, 7-14, 7-16card stock selection, 7-5Card Surface, 2-23Card Thickness Adjustment Knob, 2-16Card Type, 7-17, 7-18, 7-19Card Type, 2-8Card Type Custom options, 7-45Card Type option, 7-6, 7-45Card Type Selection, 7-6card warping, 7-17card's Magnetic Stripe/smart chip, 7-35CD (Compact Disc), 15-3Centronics, 15-3Check Cards Error, 4-2Check Film Error, 4-3Check Lam Power, 4-7Check Ribbon Error, 4-4Clean inside Printer, 8-4Clean outside of Printer, 8-4Cleaning Cartridge, 8-6Cleaning Roller, 8-6, 15-3Cleaning Tape loop, 8-6Clear Protective Overlay Panel, 2-22Coercivity, 15-3Coercivity option, 7-58Color Bars YMC, 4-18color correcting, 7-28color matching, 7-28, 15-3color matching algorithm, 7-28color matching software, 7-28Color Tone, 7-29colors, 2-8Communication Error, 4-10Compressed air, 15-3compressed Firmware Update file, 12-3Contrast, 15-3Contrast/Gamma, 7-39Control panel, 15-3Copies, 7-21copyright/version information, 7-23CR-100, 15-4CR-100 patch size, 2-29CR-79, 15-4CR-80, 7-14CR-80, 15-4
