RESTRICTED USE ONLY Fargo Electronics, Inc.HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 5-60Reviewing Frequently-asked QuestionsQuestion AnswerHow do I know if myPrinter has the Ethernetoption installed?If your Printer has the RJ45 connector installed on theback of the Printer, then it has this Ethernet optioninstalled.Can my non-Ethernet-enabled Printer beupgraded to have anEthernet interface?No.What PC operatingsystems work with myEthernet Printer?The Windows 2000/ XP / Server 2003 operating systemswork with your Ethernet Printer.How do I connect myPrinter to my network?You can connect from the RJ45 network connection on theback of your Printer to an available connection on yournetwork (not directly to your PC).You can use a good CAT-5 or better cable to make thisconnection.How can I find the MACaddress of my EthernetPrinter?If you know the IP address of your Printer, you can accessthis through the home web page of the Print Server. SeeReviewing the Reviewing the HDP600 Home Page.ORIf you do not know the IP address or the Printer does notwork with a usable IP address, then the MAC Address canbe found using the tool Fargo IP-Tracer. (Note: This canbe installed and used to locate all the Fargo-compatiblePrinters on your network.)
