RESTRICTED USE ONLY Fargo Electronics, Inc.HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 7-1Section 7: Printer AdjustmentsImportant: The HDP600 CR100/HDP600-LC CR100 Printers have their own PrinterDriver. However, the majority of the procedures in this section apply for all HDP600Printers. Please see the Card tab section for different functionality between the twoPrinters.The purpose of this section is to provide the User with specific information on Printeradjustment procedures.Table of ContentsSection 7: Printer Adjustments_______________________________________________ 7-1Table of Contents ___________________________________________________________________ 7-1Safety Messages (review carefully)______________________________________________________ 7-3Adjusting the Card Size_______________________________________________________________ 7-4Adjusting the Card Thickness Adjustment Lever _________________________________________ 7-4Printing on Alternate Card stocks _______________________________________________________ 7-5Selecting the Right Cards and optimize the HDP Print Process ______________________________ 7-5Selecting the Appropriate HDP Printer Driver settings ____________________________________ 7-6Conducting the Tape adhesion Test ___________________________________________________ 7-7Conducting the Tape adhesion Test (continued) _______________________________________ 7-8Conducting the Tape adhesion Test (continued) _______________________________________ 7-9Printer Driver Options _______________________________________________________________ 7-10Installing Printer Driver Updates ____________________________________________________ 7-10Setting Up the Printer Driver__________________________________________________________ 7-11Setting up Windows 2000/Windows XP ______________________________________________ 7-11Using the Card tab (HDP600/HDP600-LC) ______________________________________________ 7-12Using the Card tab (HDP600 CR100/HDP600-LC CR100) __________________________________ 7-13Selecting the Card Size (HDP600 and HDP600-LC) _____________________________________ 7-14Selecting the Card Size (HDP600 and HDP600-LC) (continued) _________________________ 7-15Selecting the Custom Card Size _____________________________________________________ 7-16Selecting the Card Type (all HDP600 Printers) _________________________________________ 7-17Selecting the Card Type (continued) _______________________________________________ 7-18Selecting the Card Hopper (HDP600 and HDP600-LC only) ______________________________ 7-19Selecting the Card Hopper (HDP600 CR100 and HDP600-LC CR100 only) __________________ 7-20Setting the Orientation ____________________________________________________________ 7-21Specifying the number of Copies ____________________________________________________ 7-21Selecting the Diagnostics button ____________________________________________________ 7-22Selecting the Test Print button ______________________________________________________ 7-22Selecting the About button _________________________________________________________ 7-23Using the Device Options tab (HDP600/HDP600-LC)______________________________________ 7-24Using the Device Options tab (HDP600 CR100/ HDP600-LC CR100) _________________________ 7-25Adjusting the Ribbon Type_________________________________________________________ 7-26Adjusting the Film Type___________________________________________________________ 7-27Adjusting for the Color Matching____________________________________________________ 7-28Adjusting for the Color Tone – Natural or Enhanced _____________________________________ 7-29Adjusting for the Resin Dither ______________________________________________________ 7-30Using the Print Both Sides option____________________________________________________ 7-31Using the Split 1 Set of Ribbon Panels option __________________________________________ 7-32Using the Print Back Side First option ________________________________________________ 7-33Using the Print Back Side Only option________________________________________________ 7-34Using the Rotate Front 180 Degrees or Rotate Back 180 Degrees options ____________________ 7-35Using the Print in Single Card Mode option____________________________________________ 7-36
