RESTRICTED USE ONLY Fargo Electronics, Inc.HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) viInstalling Printer Driver Updates ____________________________________________________ 7-10Setting Up the Printer Driver__________________________________________________________ 7-11Setting up Windows 2000/Windows XP ______________________________________________ 7-11Using the Card tab (HDP600/HDP600-LC) ______________________________________________ 7-12Using the Card tab (HDP600 CR100/HDP600-LC CR100) __________________________________ 7-13Selecting the Card Size (HDP600 and HDP600-LC) _____________________________________ 7-14Selecting the Custom Card Size _____________________________________________________ 7-16Selecting the Card Type (all HDP600 Printers) _________________________________________ 7-17Selecting the Card Hopper (HDP600 and HDP600-LC only) ______________________________ 7-19Selecting the Card Hopper (HDP600 CR100 and HDP600-LC CR100 only) __________________ 7-20Setting the Orientation ____________________________________________________________ 7-21Specifying the number of Copies ____________________________________________________ 7-21Selecting the Diagnostics button ____________________________________________________ 7-22Selecting the Test Print button ______________________________________________________ 7-22Selecting the About button _________________________________________________________ 7-23Using the Device Options tab (HDP600/HDP600-LC)______________________________________ 7-24Using the Device Options tab (HDP600 CR100/ HDP600-LC CR100) _________________________ 7-25Adjusting the Ribbon Type_________________________________________________________ 7-26Adjusting the Film Type___________________________________________________________ 7-27Adjusting for the Color Matching____________________________________________________ 7-28Adjusting for the Color Tone – Natural or Enhanced _____________________________________ 7-29Adjusting for the Resin Dither ______________________________________________________ 7-30Using the Print Both Sides option____________________________________________________ 7-31Using the Split 1 Set of Ribbon Panels option __________________________________________ 7-32Using the Print Back Side First option ________________________________________________ 7-33Using the Print Back Side Only option________________________________________________ 7-34Using the Rotate Front 180 Degrees or Rotate Back 180 Degrees options ____________________ 7-35Using the Print in Single Card Mode option____________________________________________ 7-36Using the Disable Printing option____________________________________________________ 7-37Using the Image Color tab (HDP600) ___________________________________________________ 7-38Using the Image Transfer tab _________________________________________________________ 7-42Adjusting the Image Position controls ________________________________________________ 7-43Adjusting the Transfer Dwell Time and Temperature ____________________________________ 7-45Using the K Panel Resin tab __________________________________________________________ 7-46Selecting the Full Card with the K Panel Resin tab ______________________________________ 7-47Selecting the Defined Area(s) with the K Panel Resin tab _________________________________ 7-48Selecting the Undefined Area(s) with the K Panel Resin tab _______________________________ 7-49Defining the Area to activate the Card Grid ____________________________________________ 7-50Measuring the Total Card area ______________________________________________________ 7-51Measuring the Area to be positioned on the Card________________________________________ 7-52Selecting the Print YMC under the K and Print K Only options ____________________________ 7-53Using the Magnetic Encoding tab ______________________________________________________ 7-54Using the Encoding Mode option ____________________________________________________ 7-55Encoding the Mode/Coercivity/Magnetic Track Selection_________________________________ 7-57Reviewing the Magnetic Track Options _______________________________________________ 7-59Reviewing the Enable MLE Support checkbox _________________________________________ 7-60Reviewing the Verification options __________________________________________________ 7-61Reviewing the Shift Data Left ______________________________________________________ 7-62Reviewing the ISO Track Locations__________________________________________________ 7-63Sending the Track Information ______________________________________________________ 7-64Reviewing the Sample String _______________________________________________________ 7-65Reviewing the ASCII Code and Character Table ________________________________________ 7-66Using the Lamination tab (only with Card Lamination Module) ______________________________ 7-67Selecting the Lamination Position ___________________________________________________ 7-68Selecting the Lamination Side ______________________________________________________ 7-69Selecting the Lamination Type______________________________________________________ 7-70
