RESTRICTED USE ONLY Fargo Electronics, Inc.HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 2-7Technical SpecificationsTerm DescriptionAcceptedStandard CardSizesHDP600 and HDP600-LC (See Card tab under PrinterAdjustments): CR-80: This selection is the default form size for the HDP600.This will print a 3.375 in. L x 2.125 in. W (85.6mm L x 54mm W)image including a .04 over-bleed on each of the 4 sides. Thismakes the overall form size 2.204 X 3.452 (56 X 87.7 mm). CR-80 No Over-Bleed: This selection eliminates the over-bleed on both the leading and trailing edge making the form sizeof 3.374 in. L x 2.2 in. W (85.7mm L x 56mm W). Note: Thisselection is used to improve the overall readability of barcodes. Custom: This selection is used to create a custom form sizefrom 1.0 x 3.0 to 2.204 to 3.452 (25.4 X 76.2 mm to 56 X 87.7mm).HDP600 CR100 and HDP600-LC CR100 (same reference): CR-100: This selection is the default form size for the HDP600CR100. This will print 3.88 in. L x 2.63 in. W (98.5mm L x 67mmW) including a .04 over-bleed on each of the 4 sides.This makes the overall form size 3.92 in. L x 2.67 in. W(98.9mm L x 71mm W). The CR-100 size PolyGuard appliesonly if laminating with HDP600-LC CR100. CR-100 No Over-Bleed: This selection eliminates the over-bleed on both the leading and trailing edge making the form sizeof 3.88 in. L x 2.63 in. W (98.5mm L x 67mm W). (Note: Thisselection is used to improve the overall readability of barcodes.) Custom: Select the Custom option under Card tab in thePrinter Driver. Enter the dimensions of the card into the PrintWidth and Print Length boxes if using a card size that variesfrom the CR-100. Add .04" (1mm) to each dimension to ensureEdge-to-Edge printing.
