RESTRICTED USE ONLY Fargo Electronics, Inc.HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 7-45Adjusting the Transfer Dwell Time and TemperatureUse the Image Transfer option to control of the Transfer Dwell Time and TransferTemperature. These settings control the speed and temperature at which printed images aretransferred from the HDP Film to the card. These settings may vary depending on thecard type. The Printer Driver automatically optimizes these settings according to the selection madein the Card Type option. Changes made to the Dwell Time and temperature settings are saved for the selectedCard Type option (upon exiting the Printer Driver setup in the Printer’s Control Panel).Step Procedure1 Return to the factory default settings for the selected Card Type by clickingon the Default button. If using cards (that differ from the Card Type Glossy-PVC or Matte-PVC options), select one of the Card Type Custom options.2 Adjust the Dwell Time and temperature settings Guidely to ensure properimage transfer. Determine the appropriate settings for the card stock bysetting the Transfer Dwell Time and Transfer Temperature to the defaultsettings. Print a card. If the HDP Film is not transferring properly, adjust these settingsaccordingly.OR If the Film is transferring properly, perform a final durability test called theTape Test.For instructions on how to do a tape test, see Conducting the Tape adhesionTest procedure.
