RESTRICTED USE ONLY Fargo Electronics, Inc.HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 7-53Selecting the Print YMC under the K and Print K Only optionsStep Procedure1 Use the Defined Area function.a. Define an area by clicking on the Defined Area UP arrow. (Note:Another .2 x .2 (5mm x 5mm) area will appear in the lower left-handcorner. This is the location in which all newly defined areas will firstappear. Up to 5 areas can be defined.) Additional areas cannot be added until the most recently created areahas been moved or sized. For this reason, size and position eacharea as it is created. Use the Defined Area arrows to navigate back and forth from area toarea. The active area will always be highlighted with a dotted outline.b. Delete an area by using the Defined Area arrows to select the area andclick on the Delete button. (Note: If all areas are deleted, the K PanelResin options will automatically be deselected.)2 Select the Print YMC Under K option to print all black in the designatedareas with the Yellow (Y), Magenta (M) and Cyan (C) Ribbon Panels directlybeneath the resin black (K) Panel. (Note: Select this option if printing resinblack text or barcodes onto a colored background to provide a more gradualtransition between the two.)ORSelect the Print K Only option to print all black in the designated areas onlywith the resin black (K) Panel or to print resin black onto a white backgroundto maximize the sharpness of printed text and barcodes.
