Falcon Elise 90 Dual Fuel User's Manual & Installation Instructions

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSONDisconnect from electricity before servicing. Check appliance is safe when you have finished.362.5 To Replace a Hotplate Burnernn DISCONNECT FROM THE ELECTRICITY SUPPLY.Remove the hotplate tray (see 2.1). The burners (exceptthe wok burner) are mounted on support struts. For theseburners, disconnect the burner feed pipes at the burner.Remove the screws at the front and rear holding the supportstruts. Lift the strut and burners clear. The burners are fixedto the support struts with 2 screws. Remove the appropriateburner and fit the new one.Reassemble in reverse order. Check that the burner operationis satisfactory.Wok BurnerDisconnect the burner feed pipes at the burner.Fit the new one and reassemble in reverse order. Check thatthe burner operation is satisfactory.2.6 To Change a Hotplate Burner Thermocouplenn DISCONNECT FROM THE ELECTRICITY SUPPLY.Remove the control panel and hotplate (see 1.1 & 2.1).Unplug the FSD lead from the rear of the tap.The thermocouple sits in a hole that has a slot at one side.Ensure that the thermocouple is cool. Turn the thermocoupleso that the earth lead (no sleeve) is in line with the slot. Liftthe thermocouple clear of the hole.Reassemble in reverse order.3 Controls3.1. To Replace the Ignition or Light Switchnn DISCONNECT FROM THE ELECTRICITY SUPPLY.Remove the control panel (see 1.1).Note: The old switch may be destroyed during removal.Remove the old switch from its bezel by gripping the switchbody behind the control panel and twisting sharply. Removethe switch bezel by folding back the locking wings andpushing forward.To fit the new bezel to the control panel: first line up theraised key on its body with the cut-out in the control paneland push it in from the front.Assemble the new switch to the bezel by lining up the keysections and pushing home. Fit the new button by pushing infrom the front.Replace the control panel in the reverse order and test forcorrect operation.