| 
B90 LOW IMPEDANCE BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL C-1B90 Low Impedance Bus Differential SystemAppendix C: Command line interfaceCommand line interfaceC.1 Command line interfaceSetupCLI is a command line interface to communicate with the EnerVista UR Setup software. Commands can be sent froma DOS prompt or a Windows batch file.The interface is installed with the EnerVista software. Its default location is similar toC:\Program Files\EnerVista\Tools\SetupCLIThe EnerVista software needs to be installed on a computer to run the command line interface. The command lineinterface does not provide a remote connection to a computer running the EnerVista software.Items to note are as follows:• Works with EnerVista UR Setup version 6.10 and later• Available in English only• The graphical user interface of the software is not available concurrently with the command line interface• It does not support concurrent commands• It has limited functionality with CyberSentry• It does not interface with UR Engineer• It does not work when EnerVista UR Setup security is enabled, meaning when login is requiredCommand syntax is as follows:• Options enclosed in [ ] are optional• Values enclosed in < > are replaced with your own values• is replaced with the EnerVista software to receive the command. Use "URPC" for EnerVista UR Setup.• is the UR device name, as displayed in the Device Name field of the Device Setup window and listed in theOnline Window. Use quotes with spaces, such as "B30 Belfort".• "-s" can be used with any command to suppress error messages• All commands, their return codes, and error description are logged in the fileC:\ProgramData\EnerVista\Tools\SetupCLI\SetupCLI.log• When the Supervisor account is enabled, the 'Lock Relay' setting must first be changed to No before the putsettings,inservice, or reboot command can be used. This setting cannot be changed using the command line interface.• Use quotes ("") to enclose any parameter containing a space• Commands, options, and parameters are case sensitive |
