3-50 B90 LOW IMPEDANCE BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUALADD DEVICE TO SOFTWARE CHAPTER 3: INSTALLATION33. Click the Quick Connect button to open the window.4. Select the Ethernet interface and enter the IP address assigned to the B90, then click the Connect button. TheEnerVista UR Setup software creates a site named “Quick Connect” with a corresponding device also named “QuickConnect” and displays them on the left side of the screen.5. Expand the sections to view data directly from the B90 device.Each time that the EnerVista UR Setup software is initialized, click the Quick Connect button to establish directcommunications to the B90. This ensures that configuration of the EnerVista UR Setup software matches the B90 modelnumber.When direct communications with the B90 via Ethernet is complete, make the following changes:1. From the Windows desktop, right-click the My Network Places icon and select Properties to open the networkconnections window.2. Right-click the Local Area Connection icon and select the Properties item.3. Select the Internet Protocol (TCP/IP) item from the list provided and click the Properties button.4. Set the computer to “Obtain a relay address automatically” as shown.
