5-14 F60 Feeder Protection System GE Multilin5.2 PRODUCT SETUP 5 SETTINGS5The table outlines access rights.4. Click OK to add the user account to the security management system.MODIFYING USER PRIVILEGESThe following pre-requisites are required to modify user privileges in the EnerVista security management system:• The user modifying the privileges must have administrator rights• The EnerVista security management system must be enabledTo modify user privileges:1. Select the Security > User Management menu item to open the user management window.2. Locate the username in the User field.3. Modify the user access rights by enabling or disabling one or more of the check boxes.The table outlines access rights.Table 5–1: ACCESS RIGHTS SUMMARYFIELD DESCRIPTIONDelete Entry Deletes the user account when exiting the user management windowActual Values Allows the user to read actual valuesSettings Allows the user to read setting valuesCommands Allows the user to execute commandsEvent Recorder Allows the user to use the digital fault recorderFlexLogic Allows the user to read FlexLogic valuesUpdate Info Allows the user to write to any function to which they have read privileges. When any of the Settings, EventRecorder, and FlexLogic check boxes are enabled by themselves, the user is granted read access. Whenany of them are enabled in conjunction with the Update Info box, they are granted read and write access.The user is not granted write access to functions that are not checked, even if the Update Info field ischecked.Admin The user is an EnerVista UR Setup administrator, therefore receiving all of the administrative rights.Exercise caution when granting administrator rights.Table 5–2: ACCESS RIGHTS SUMMARYFIELD DESCRIPTIONDelete Entry Deletes the user account when exiting the user management windowActual Values Allows the user to read actual valuesSettings Allows the user to read setting valuesCommands Allows the user to execute commands
