2-16 F60 Feeder Protection System GE Multilin2.2 ORDER CODES 2 PRODUCT DESCRIPTION2| 8Z * | HI-Z 4CTINTER-RELAY COMMUNICATIONS | 2A | C37.94SM, 1300 nm single-mode, ELED, 1 channel single-mode| 2B | C37.94SM, 1300 nm single-mode, ELED, 2 channel single-mode| 2E | Bi-phase, single channel| 2F | Bi-phase, dual channel| 2G | IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel| 2H | IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels| 2I | Channel 1 - IEEE C37.94, multimode, 64/128 kbps; Channel 2 - 1300 nm, single-mode, Laser| 2J | Channel 1 - IEEE C37.94, multimode, 64/128 kbps; Channel 2 - 1550 nm, single-mode, Laser| 72 | 1550 nm, single-mode, Laser, 1 Channel| 73 | 1550 nm, single-mode, Laser, 2 Channel| 74 | Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, Laser| 75 | Channel 1 - G.703; Channel 2 - 1550 nm, single-mode Laser| 76 | IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 1 Channel| 77 | IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels| 7A | 820 nm, multimode, LED, 1 Channel| 7B | 1300 nm, multimode, LED, 1 Channel| 7C | 1300 nm, single-mode, ELED, 1 Channel| 7D | 1300 nm, single-mode, Laser, 1 Channel| 7E | Channel 1 - G.703; Channel 2 - 820 nm, multimode| 7F | Channel 1 - G.703; Channel 2 - 1300 nm, multimode| 7G | Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED| 7H | 820 nm, multimode, LED, 2 Channels| 7I | 1300 nm, multimode, LED, 2 Channels| 7J | 1300 nm, single-mode, ELED, 2 Channels| 7K | 1300 nm, single-mode, Laser, 2 Channels| 7L | Channel 1 - RS422; Channel 2 - 820 nm, multimode, LED| 7M | Channel 1 - RS422; Channel 2 - 1300 nm, multimode, LED| 7N | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED| 7P | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, Laser| 7Q | Channel 1 - G.703; Channel 2 - 1300 nm, single-mode Laser| 7R | G.703, 1 Channel| 7S | G.703, 2 Channels| 7T | RS422, 1 Channel| 7W | RS422, 2 ChannelsTRANSDUCERINPUTS/OUTPUTS| 5A | 4 DCmA inputs, 4 DCmA outputs (only one 5A module is allowed)| 5C | 8 RTD inputs| 5D | 4 RTD inputs, 4 DCmA outputs (only one 5D module is allowed)| 5E | 4 DCmA inputs, 4 RTD inputs| 5F | 8 DCmA inputs* When an 8Z module is ordered, slot F must have an 8F or 8G module.Table 2–9: ORDER CODES FOR REPLACEMENT MODULES, VERTICAL UNITSUR - ** - *
