F-6 F60 Feeder Protection System GE MultilinF.1 DEVICE PROFILE DOCUMENT APPENDIX FF23cont’d5 32-Bit Frozen Counter Event with Time 1 (read) 06 (no range, or all)07, 08 (limited quantity)129 (response)130 (unsol. resp.)17, 28 (index)6 16-Bit Frozen Counter Event with Time 1 (read) 06 (no range, or all)07, 08 (limited quantity)129 (response)130 (unsol. resp.)17, 28 (index)30 0 Analog Input (Variation 0 is used to requestdefault variation)1 (read)22 (assign class)00, 01 (start-stop)06 (no range, or all)07, 08 (limited quantity)17, 28 (index)1 32-Bit Analog Input 1 (read)22 (assign class)00, 01 (start-stop)06 (no range, or all)07, 08 (limited quantity)17, 28 (index)129 (response) 00, 01 (start-stop)17, 28 (index)(see Note 2)2 16-Bit Analog Input 1 (read)22 (assign class)00, 01 (start-stop)06 (no range, or all)07, 08 (limited quantity)17, 28 (index)129 (response) 00, 01 (start-stop)17, 28 (index)(see Note 2)3 32-Bit Analog Input without Flag 1 (read)22 (assign class)00, 01 (start-stop)06 (no range, or all)07, 08 (limited quantity)17, 28 (index)129 (response) 00, 01 (start-stop)17, 28 (index)(see Note 2)4 16-Bit Analog Input without Flag 1 (read)22 (assign class)00, 01 (start-stop)06 (no range, or all)07, 08 (limited quantity)17, 28 (index)129 (response) 00, 01 (start-stop)17, 28 (index)(see Note 2)5 short floating point 1 (read)22 (assign class)00, 01 (start-stop)06(no range, or all)07, 08 (limited quantity)17, 28 (index)129 (response) 00, 01 (start-stop)17, 28 (index)(see Note 2)32 0 Analog Change Event (Variation 0 is usedto request default variation)1 (read) 06 (no range, or all)07, 08 (limited quantity)1 32-Bit Analog Change Event without Time 1 (read) 06 (no range, or all)07, 08 (limited quantity)129 (response)130 (unsol. resp.)17, 28 (index)2 16-Bit Analog Change Event without Time 1 (read) 06 (no range, or all)07, 08 (limited quantity)129 (response)130 (unsol. resp.)17, 28 (index)3 32-Bit Analog Change Event with Time 1 (read) 06 (no range, or all)07, 08 (limited quantity)129 (response)130 (unsol. resp.)17, 28 (index)4 16-Bit Analog Change Event with Time 1 (read) 06 (no range, or all)07, 08 (limited quantity)129 (response)130 (unsol. resp.)17, 28 (index)5 short floating point Analog Change Eventwithout Time1 (read) 06 (no range, or all)07, 08 (limited quantity)129 (response)130 (unsol. resp.)17, 28 (index)7 short floating point Analog Change Eventwith Time1 (read) 06 (no range, or all)07, 08 (limited quantity)129 (response)130 (unsol. resp.)17, 28 (index)34 0 Analog Input Reporting Deadband(Variation 0 is used to request defaultvariation)1 (read) 00, 01 (start-stop)06 (no range, or all)07, 08 (limited quantity)17, 28 (index)1 16-bit Analog Input Reporting Deadband(default – see Note 1)1 (read) 00, 01 (start-stop)06 (no range, or all)07, 08 (limited quantity)17, 28 (index)129 (response) 00, 01 (start-stop)17, 28 (index)(see Note 2)2 (write) 00, 01 (start-stop)07, 08 (limited quantity)17, 28 (index)Table F–2: IMPLEMENTATION TABLE (Sheet 3 of 4)OBJECT REQUEST RESPONSEOBJECTNO. VARIATIONNO. DESCRIPTION FUNCTIONCODES (DEC) QUALIFIERCODES (HEX) FUNCTIONCODES (DEC) QUALIFIERCODES (HEX)Note 1: A default variation refers to the variation responded when variation 0 is requested and/or in class 0, 1, 2, or 3 scans. The default varia-tions for object types 1, 2, 20, 21, 22, 23, 30, and 32 are selected via relay settings. See the Communications section in Chapter 5 fordetails. This optimizes the class 0 poll data size.Note 2: For static (non-change-event) objects, qualifiers 17 or 28 are only responded when a request is sent with qualifiers 17 or 28, respec-tively. Otherwise, static object requests sent with qualifiers 00, 01, 06, 07, or 08, will be responded with qualifiers 00 or 01 (for change-event objects, qualifiers 17 or 28 are always responded.)Note 3: Cold restarts are implemented the same as warm restarts – the F60 is not restarted, but the DNP process is restarted.
