4-24 L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUALFRONT PANEL INTERFACE CHAPTER 4: INTERFACES4Figure 4-26: LED panel 2 (default labels)4.2.8 Custom LED labeling4.2.8.1 Enhanced faceplateThe following procedure requires these pre-requisites:• EnerVista UR Setup software is installed and operational• The L60 settings have been saved to a settings file• The UR front panel label cutout sheet (GE part number 1006-0047) has been downloaded fromhttp://www.gegridsolutions.com/products/support/ur/URLEDenhanced.doc and printed• Small-bladed knifeTo create custom LED labels for the enhanced front panel display:1. Start the EnerVista UR Setup software.2. Select the Front Panel Label Designer item from the Online Window or Offline Window area, for example underSettings > Front Panel Label Designer. If the option does not display, it means that the L60 does not have anenhanced front panel or that no customization is possible. The Online Window has the advantage of displaying thelive fields as opposed to blank fields.The window displays.
