Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100 190-00645-07 Rev. A106Annunciations & AlertsFlightInstrumentsEISNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/AlertsAppendixIndexGTS 800 MESSAGE ADVISORIESMessage CommentsGTS CONFIG – GTS config error.Config service req’d.The GTS and GDU have different copies of theGTS configuration, or the Mode S address isinvalid. The G1000 system should be serviced.GTS MANIFEST – GTS softwaremismatch, communication halted.The GTS has incorrect software installed. TheG1000 system should be serviced.MISCELLANEOUS MESSAGE ADVISORIESMessage CommentsFPL WPT LOCK – Flight planwaypoint is locked.Upon power-up, the G1000 system detects thata stored flight plan waypoint is locked. Thisoccurs when an navigation database updateeliminates an obsolete waypoint. The flightplan cannot find the specified waypoint andflags this message. This can also occur withuser waypoints in a flight plan that is deleted.Remove the waypoint from the flight plan if itno longer exists in any database,Or - update the waypoint name/identifier toreflect the new information.FPL WPT MOVE – Flight planwaypoint moved.The system has detected that a waypointcoordinate has changed due to a newnavigation database update. Verify that storedflight plans contain correct waypoint locations.TIMER EXPIRD – Timer has expired. The system notifies the pilot that the timer hasexpired.DB CHANGE – Database changed.Verify user modified procedures.This occurs when a stored flight plan contains aprocedure that is no longer consistent with thenavigation database. This alert is issued onlyafter a navigation database update. Verify thatthe user-modified procedures in stored flightplans are correct and up to date.
