Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100 190-00645-07 Rev. A28Flight PlanningFlightInstrumentsEISNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/AlertsAppendixIndex6) The cursor is now in the ‘WAYPOINT TYPE’ field. If desired, the waypointcan be made temporary (deleted automatically when the system is turnedoff). If the waypoint is to remain in the system, proceed to step 7.a) Turn the large FMS Knob one click to the left to highlight‘TEMPORARY’.b) Press the ENT Key to place a check-mark in the box. Turn the largeFMS Knob to place the cursor back in the ‘WAYPOINT TYPE’ field.7) With the cursor in the ‘WAYPOINT TYPE’ field, turn the small FMS Knob todisplay a list of waypoint types.8) Turn the small FMS Knob to select LAT/LON (latitude and longitude).9) Press the ENT Key.CREATE A USER WAYPOINT DEFINED BY RADIALS FROM OTHER WAYPOINTS1) Turn the large FMS Knob on the Control Unit to select the ‘WPT’ page group.2) Turn the small FMS Knob to select the User WPT Information Page.3) Press the NEW Softkey. A waypoint is created at the current aircraftposition.4) Enter the desired waypoint name.5) Press the ENT Key.6) The cursor is now in the ‘WAYPOINT TYPE’ field. If desired, the waypointcan be made temporary (deleted automatically when the system is turnedoff). If the waypoint is to remain in the system, proceed to step 7.a) Turn the large FMS Knob one click to the left to highlight‘TEMPORARY’.b) Press the ENT Key to place a check-mark in the box. Turn the largeFMS Knob to place the cursor back in the ‘WAYPOINT TYPE’ field.7) With the cursor in the ‘WAYPOINT TYPE’ field, turn the small FMS Knob todisplay a list of waypoint types.8) Turn the small FMS Knob to select RAD/RAD (radial/radial).9) Press the ENT Key.10) The cursor moves to the ‘REFERENCE WAYPOINTS’ field. With the firstwaypoint name highlighted, use the FMS Knobs to enter the desiredwaypoint name. Waypoints may also be selected as follows:
