Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100 190-00645-07 Rev. A32Flight PlanningFlightInstrumentsEISNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/AlertsAppendixIndex3) Enter a user waypoint name (up to six characters).4) Press the ENT Key to accept the selected name.5) If desired, define the type and location (i.e., LAT/LON, RAD/RAD or RAD/DIS) of the waypoint.6) Press the ENT Key to accept the new waypoint.7) If desired, change the storage method of the waypoint to ‘TEMPORARY‘ or‘NORMAL‘ by moving the cursor to ‘TEMPORARY‘ and selecting the ENTKey to check or uncheck the box.8) Press the FMS Knob to remove the flashing cursor.9) Press the GO BACK Softkey to return to the map page.DELETE A USER WAYPOINT1) Turn the large FMS Knob to select the ‘WPT’ page group.2) Turn the small FMS Knob to select the User WPT Information Page.3) Press the FMS Knob to activate the cursor.4) Turn the large FMS Knob to the place the cursor in the ‘USER WAYPOINT LIST’field.5) Turn the small FMS Knob to highlight the desired waypoint.6) Press the DELETE Softkey.7) The message ‘Would you like to delete the user waypoint?’ is displayed. With‘YES’ highlighted, press the ENT Key.CREATE A FLIGHT PLANNOTE: When creating a flight plan in the Active Flight Plan Window, the firstleg is activated automatically after it is created.Creating an active flight plan:1) Press the FPL Key.2) Press the FMS Knob to activate the cursor (only on MFD).3) Turn the small FMS Knob to display the Waypoint Information Window.(Turning it clockwise displays a blank Waypoint Information Window,turning it counter-clockwise displays the Waypoint Information Windowwith a waypoint selection submenu allowing selection of active flight plan,nearest, recent, user, or airway waypoints).
