Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100 190-00645-07 Rev. A44ProceduresFlightInstrumentsEISNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/AlertsAppendixIndex4) Turn the large FMS Knob to highlight the desired arrival.5) Press the ENT Key. A list of transitions is displayed for the selected arrival.6) Turn either FMS Knob to select the desired transition.7) Press the ENT Key. A list of runways may be displayed for the selectedarrival.8) Turn the large FMS Knob to highlight the desired runway.9) Press the ENT Key.10) With ‘LOAD?’ highlighted, press the ENT Key.11) The arrival becomes part of the active flight plan.ACTIVATE AN ARRIVAL LEG1) Press the FPL Key on the MFD to display the active flight plan.2) Press the FMS Knob to activate the cursor.3) Turn the large FMS Knob to highlight the desired waypoint within thearrival.4) Press the ACT LEG Softkey. A confirmation window showing the selectedleg is displayed.5) With ‘ACTIVATE’ highlighted, press the ENT Key.LOAD AND/OR ACTIVATE AN APPROACH PROCEDURENOTE: If certain GPS parameters (SBAS, RAIM, etc.) are not available, somepublished approach procedures for the desired airport may not be displayedin the list of available approaches.1) Press the PROC Key.2) Turn the large FMS Knob to highlight ‘SELECT APPROACH’.3) Press the ENT Key. A list of available approaches for the destination airportis displayed.4) Turn either FMS Knob to highlight the desired approach.5) Press the ENT Key. A list of available transitions for the selected approachprocedure is now displayed.
