Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100190-00645-07 Rev. A27Flight PlanningFlightInstruments EISNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix Index6) Enter the departure time. Press the ENT Key when finished. Departure timemay be entered in local or UTC time, depending upon system settings.7) The flashing cursor moves to the ground speed (GS) field. Enter the groundspeed. Press the ENT Key when finished. Note that in ‘automatic’ pagemode, ground speed is provided by the system.8) The flashing cursor moves to the fuel flow field. Enter the fuel flow. Pressthe ENT Key when finished. Note that in ‘AUTOMATIC’ page mode, fuel flowis provided by the system.9) The flashing cursor moves to the fuel onboard field. Modify the fuel onboard.Press the ENT Key when finished. In ‘AUTOMATIC’ mode, fuel onboard isprovided by the entry made on the Weight Planning Page.10) The flashing cursor moves to the calibrated airspeed (CALIBRATED AS) field.Enter the calibrated airspeed. Press the ENT Key when finished. Note thatin ‘AUTOMATIC’ page mode, calibrated airspeed is provided by the system.11) The flashing cursor moves to the altitude (IND ALTITUDE) field. Enter thealtitude. Press the ENT Key when finished. Note that in ‘AUTOMATIC’ pagemode, altitude is provided by the system.12) The flashing cursor moves to the barometric setting (PRESSURE) field. Enterthe desired baro setting. Press the ENT Key when finished. Note that in‘AUTOMATIC’ page mode, the baro setting is provided by the setting enteredon the PFD.13) The flashing cursor moves to the air temperature (TOTAL AIR TEMP) field. Enterthe desired air temperature. Press the ENT Key when finished. Note that in‘AUTOMATIC’ page mode, air temperature is provided by the system outsideair temperature.CREATE A USER WAYPOINT DEFINED BY LATITUDE & LONGITUDE1) Turn the large FMS Knob on the Control Unit to select the ‘WPT’ page group.2) Turn the small FMS Knob to select the User WPT Information Page.3) Press the NEW Softkey. A waypoint is created at the current aircraftposition.4) Enter the desired waypoint name.5) Press the ENT Key.
