Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100190-00645-07 Rev. A49Hazard AvoidanceFlightInstruments EISNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix IndexHAZARD AVOIDANCECUSTOMIZING THE HAZARD DISPLAYS ON THE NAVIGATION MAP1) With the Navigation Map Page displayed, press the MENU Key to displaythe Navigation Map Page Menu. The cursor flashes on the ‘Map Setup’option.2) Press the ENT Key. The Map Setup Menu is displayed. Turn the small FMSKnob to select ‘Weather’ to customize the display of weather features.Select ‘Traffic’ to customize the display of traffic.3) Press the small FMS Knob to return to the Navigation Map Page.STORMSCOPE® (OPTIONAL)WARNING:Do not rely on information from a lightning detection system displayas the sole basis for hazardous weather avoidance. Range limitations andinterference may cause the system to display inaccurate or incomplete information.Refer to documentation from the lightning detection system manufacturer fordetailed information about the system.Displaying Stormscope Lightning Data on the Navigation Map Page1) Press the MAP Softkey.2) Press the STRMSCP Softkey. Press the STRMSCP Softkey again to removeStormscope Lightning Data from the Navigation Map Page.Lightning Age SymbolStrike is less than 6 seconds oldStrike is between 6 and 60 seconds oldStrike is between 1 and 2 minutes oldStrike is between 2 and 3 minutes oldSelecting the ‘cell’ or ‘strike’ mode on the Navigation Map1) Press the MENU Key.2) With ‘Map Setup’ selected, press the ENT Key.3) Select the ‘Weather’ group.
