Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100 190-00645-07 Rev. A70Additional FeaturesFlightInstrumentsEISNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/AlertsAppendixIndexOr:Press the FMS Knob to highlight the channel list and turn the large FMSKnob to scroll through the channels.3) With the desired channel highlighted, press the ENT Key.Entering a Channel Directly1) While on the XM Radio Page, press the CHNL Softkey.2) Press the DIR CH Softkey. The channel number in the Active Channel Boxis highlighted.3) Press the numbered softkeys located on the bottom of the display todirectly select the desired channel number.4) Press the ENT Key to activate the selected channel.Assigning Channel PresetsUp to 15 channels from any category can be assigned a preset number.1) On the XM Radio Page, with the desired channel active, press the PRESETSSoftkey to access the first five preset channels (PS1 - PS5).2) Press the MORE Softkey to access the next five channels (PS6 – PS10),and again to access the last five channels (PS11 – PS15). Pressing theMORE Softkey repeatedly cycles through the preset channels.3) Press any one of the (PS1 - PS15) softkeys to assign a number to theactive channel.4) Press the SET Softkey on the desired channel number to save the channelas a preset.Adjusting Volume1) With the XM Radio Page displayed, select the VOL Softkey.2) Press the VOL Softkey to access the volume control softkeys.3) Press VOL + or VOL - softkeys to adjust the volume level.Mute SiriusXM Audio1) Select the XM Radio Page or XM Information Page2) Select the MUTE Softkey to mute the audio. Select the MUTE Softkeyagain to unmute the audio.
