Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100 190-00645-07 Rev. A4Flight InstrumentsFlightInstrumentsEISNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/AlertsAppendixIndexDISPLAYING WIND DATA1) Press the PFD Softkey.2) Press the WIND Softkey to display wind data to the left of the HSI.3) Press one of the OPTN softkeys to change how wind data is displayed:• OPTN 1: Headwind/tailwind and crosswind arrows with numeric speedcomponents• OPTN 2: Wind direction arrow with numeric headwind (H) or tailwind (T)and crosswind (X) speed components• OPTN 3: Wind direction arrow with true numeric direction and speed4) To remove the window, press the OFF Softkey.GENERIC TIMER1) Press the TMR/REF Softkey, then turn the large FMS Knob to select thetime field (hh/mm/ss). Turn the FMS Knobs to set the desired time, thenpress the ENT Key. The UP/DOWN field is now highlighted.2) Turn the small FMS Knob to display the UP/DOWN window. Turn the FMSKnob to select ‘UP’ or ‘DOWN’, then press the ENT Key. ‘START?’ is nowhighlighted.3) Press the ENT Key to START, STOP, or RESET the timer (if the timer iscounting DOWN, it will start counting UP after reaching zero). Press theCLR Key or the TMR/REF Softkey to remove the window.CHANGING VSPEEDS AND TURNING BUGS ON/OFF1) Press the TMR/REF Softkey.2) Turn the large FMS Knob to highlight the desired Vspeed.3) Use the small FMS Knob to change the Vspeed in 1-kt increments (when aspeed has been changed from a default value, an asterisk appears next tothe speed).4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFFfield5) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.6) To remove the window, press the CLR Key or the TMR/REF Softkey.
