Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100190-00645-07 Rev. A51Hazard AvoidanceFlightInstruments EISNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix Index3) Press the CELL Softkey to display ‘CELL’ data or press the STRIKE Softkey todisplay ‘STRIKE’ data. ‘CELL’ or ‘STRIKE’ is displayed in the mode box in theupper left corner of the Stormscope Page.4) Press the BACK Softkey to return to the main Stormscope page.Change the Viewing Mode Between 360˚ and 120˚1) Select the Stormscope Page.2) Press the VIEW Softkey. The 360 and ARC softkeys are displayed. Press the360 Softkey to display a 360˚ viewing area or press the ARC Softkey todisplay a 120˚ viewing area.3) Press the BACK Softkey to return to the main Stormscope page.SIRIUSXM WEATHER (OPTIONAL)WARNING:Do not use data link weather information for maneuvering in, near,or around areas of hazardous weather. Information contained within data linkweather products may not accurately depict current weather conditions.WARNING: Do not use the indicated data link weather product age to deter-mine the age of the weather information shown by the data link weatherproduct. Due to time delays inherent in gathering and processing weatherdata for data link transmission, the weather information shown by the datalink weather product may be significantly older than the indicated weatherproduct age.Displaying SiriusXM Weather on the Navigation Map Page1) Press the MAP Softkey.2) Press the NEXRAD or XM LTNG Softkey to display the desired weather.Press the applicable softkey again to remove weather data from theNavigation Map Page.Display METAR and TAF information on the Airport Information Page1) Turn the large FMS Knob to select the WPT Page Group.2) Turn the small FMS Knob to select the Airport Information Page.3) Press the WX Softkey to display METAR and TAF text (METAR and TAFinformation is updated every 12 minutes).
