Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100190-00645-07 Rev. A71Additional FeaturesFlightInstruments EISNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix IndexMAINTENANCE LOGSNOTE: An account must be established with Garmin Connext™ to make fulluse of the Maintenance Logs feature.The system provides recording of CAS, CMC, exceedances, and other critical aircraftdata that occur while the aircraft is on the ground or in flight. This may include, butis not limited to, engine trend, exceedance and/or aircraft position data.Viewing the Maintenance Logs Page1) Turn the large FMS Knob to select the AUX page group.2) Turn the small FMS Knob to select AUX-MAINTENANCE LOGS Page.Selecting the Desired Log Folder1) While viewing the Maintenance Logs Page, press the small FMS Knob toactivate the cursor in the Folders.2) Turn the small FMS Knob to display the list of available folders. ‘INT’displayed next to the folder name indicates that folder of log files is stored ininternal system memory. ‘EXT’ displayed next to a folder name indicates thefolder, and its contents are saved to the SD Card located in the bottom cardslot of the MFD.3) Turn either FMS Knob to select the desired folder.4) Press the ENT Key. The log files for the selected folder are displayed.5) Press the small FMS Knob to remove the cursor.Copy a Log File to an SD Card1) Place an SD Card in the top card slot of the MFD.2) While viewing the Maintenance Logs Page, press the FMS Knob to activatethe cursor.3) Turn the large FMS Knob to display the list of available folders.4) Turn either FMS Knob to select the desired folder.5) Press the ENT Key.6) Turn the large FMS Knob to place the cursor on the ‘EXPORT’ button to theright of the log file to be transmitted.
