Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100 190-00645-07 Rev. A54Hazard AvoidanceFlightInstrumentsEISNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/AlertsAppendixIndexTRAFFIC SYSTEMS• If Traffic information Service (TIS) is configured, a STANDBY, OPERATE, andTNA MUTE Softkey is displayed.• If a Traffic Advisory System (TAS) is configured, a STANDBY, OPERATE, TEST,and ALT MODE Softkey is displayed.Traffic Symbol DescriptionNon-Threat Traffic(intruder is beyond 5 nm and greater than 1200’ vertical separation)Proximity Advisory (PA) (TAS only, not available with TIS)(intruder is within 5 nm and less than 1200’ vertical separation)Traffic Advisory (TA)(closing rate, distance, and vertical separation meet TA criteria)Traffic Advisory Off ScaleTraffic Symbol DescriptionTraffic Information Service (TIS)NOTE: If the G1000 is configured to use an optional Traffic Advisory System(TAS), TIS is not available for use.NOTE: Traffic Information Service (TIS) is only available when the aircraft iswithin the service volume of a TIS capable terminal radar site.Displaying Traffic on the Traffic Map Page1) Turn the large FMS Knob to select the Map Page Group.2) Turn the small FMS Knob to select the Traffic Map Page.3) Press the OPERATE Softkey to begin displaying traffic. ‘OPERATING’ isdisplayed in the Traffic Mode field.4) Press the STANDBY Softkey to place the system in the Standby Mode.‘STANDBY’ is displayed in the Traffic Mode field.5) Rotate the Joystick clockwise to display a larger area or rotate counter-clockwise to display a smaller area.
