Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100 190-00645-07 Rev. A36Flight PlanningFlightInstrumentsEISNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/AlertsAppendixIndex3) Press the MENU Key, highlight ‘Hold At Wpt’, and press the ENT Key. TheHOLD AT window appears with the course field highlighted.4) Use the FMS Knobs to edit the entry course, and press the ENT Key.5) Use the small FMS Knob to select ‘INBOUND’ or ‘OUTBOUND’ coursedirection, and press the ENT Key.6) Use the small FMS Knob to select ‘TIME’ or ‘DIST’ length mode, and pressthe ENT Key.7) Use the FMS Knobs to edit the length, and press the ENT Key.8) Use the small FMS Knob to select ‘RIGHT’ or ‘LEFT’ turn direction, andpress the ENT Key.9) Use the FMS Knobs to edit the Expect Further Clearance Time (EFC TIME),and press the ENT Key.10) Press the ENT Key while ‘LOAD?’ is highlighted to add the hold into theflight plan.CREATING A USER-DEFINED HOLD AT THE AIRCRAFT PRESENT POSITION1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the ActiveFlight Plan Window (PFD).2) Press the MENU Key, highlight ‘Hold At Present Position’, and press theENT Key. The HOLD AT window appears with the course field highlighted.3) If desired, use the FMS Knobs to edit the entry course, and press the ENTKey.4) Use the small FMS Knob to select ‘INBOUND’ or ‘OUTBOUND’ coursedirection, and press the ENT Key.5) Use the small FMS Knob to select ‘TIME’ or ‘DIST’ length mode, and pressthe ENT Key.6) Use the FMS Knobs to edit the length, and press the ENT Key.7) Use the small FMS Knob to select ‘RIGHT’ or ‘LEFT’ turn direction, andpress the ENT Key.8) Use the FMS Knobs to edit the Expect Further Clearance Time (EFC TIME),and press the ENT Key.9) Press the ENT Key while ‘ACTIVATE?’ is highlighted to create an OffrouteDirect-to hold waypoint and activate the hold.
