Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100 190-00645-07 Rev. A20GPS NavigationFlightInstrumentsEISNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/AlertsAppendixIndex7) Turn the small FMS Knob to enter the desired altitude.8) Press the ENT Key. If the waypoint entered is an airport, the option toselect MSL or AGL is now displayed. If the waypoint is not an airport,proceed to step 10.9) Turn the small FMS Knob to select ‘MSL’ or ‘AGL’.10) Press the ENT Key. The cursor is placed in the OFFSET distance field.11) Turn the small FMS Knob to enter the desired target altitude offset fromthe selected Direct-to.12) Press the ENT Key to highlight ‘Activate?’ or turn the large FMS Knob tohighlight the ‘CRS’ field.13) Turn the small FMS Knob to enter the desired course to the waypoint.14) Press the ENT Key to highlight ‘ACTIVATE?’.15) Press the ENT again to activate the Direct-to.ACTIVATE A STORED FLIGHT PLAN1) Press the FPL Key and turn the small FMS Knob to display the Flight PlanCatalog Page.2) Press the FMS Knob to activate the cursor.3) Turn the large FMS Knob to highlight the desired flight plan4) Press the ACTIVE Softkey. The confirmation window is now displayed.5) With ‘OK’ highlighted, press the ENT Key to activate the flight plan. To cancelthe flight plan activation, turn the large FMS Knob to highlight ‘CANCEL’ andpress the ENT Key.ACTIVATE A FLIGHT PLAN LEG1) From the Active Flight Plan Page, press the FMS Knob to activate the cursorand turn the large FMS Knob to highlight the desired waypoint.2) Press the ACT LEG Softkey.OR3) Press the MENU Key, select the ‘Activate Leg’ option from the page menuand press the ENT Key. This step must be used when activating a leg fromthe PFD.4) With ‘Activate’ highlighted, press the ENT Key.
