7 - 22 Genie S-80 & Genie S-85 Part No. 34032Service Manual - First EditionSection 7 - Repair Procedures5-1Turntable CoversHow to Remove aTurntable Cover1 Raise the turntable cover. Support the opencover with an overhead crane or forklift.Do not lift it.Crushing hazard. Due to its heavyweight, do not attempt to supportthe cover by hand.2 Remove the upper and lower retaining clipsfrom the gas strut.3 Gently pry the strut pivot sockets off of the ballstuds and remove the strut. Protect the strutcylinder rod from damage.4 Remove the cover hinge bolts, that fasten thehinge support bracket to the bulkhead.5 Carefully lift and remove the cover fromthe machine.If a turntable cover must bereplaced, be sure that allappropriate safety andinstructional decals areapplied to the new cover.Alignment adjustments may benecessary when a new coveris installed.Turntable Covers
