Part No. 34032 Genie S-80 & Genie S-85 3 - 1Section 3 - Scheduled Maintenance InspectionsService Manual - First EditionTools arerequiredNew partsrequiredWarmenginerequiredColdenginerequiredDealerservicesuggestedScheduled Maintenance InspectionsObserve and Obey:Maintenance inspections shall be completed bya person trained and qualified on themaintenance of this machine.Scheduled maintenance inspections shall becompleted daily, quarterly, annually and every2 years as specified on the MaintenanceInspection Report.Failure to properly complete eachinspection when required maycause death, serious injury orsubstantial damage.Immediately tag and remove from service adamaged or malfunctioning machine.Repair any machine damage or malfunctionbefore operating machine.Keep records on all inspections for three years.Machines that have been out of service for aperiod longer than 3 months must complete thequarterly inspection.About This SectionThe ScheduleThere are four types of maintenance inspectionsthat must be performed according to a schedule—daily, quarterly, annual, two year. To account forrepeated procedures, the Maintenance Tables andthe Maintenance Inspection Report have beendivided into four subsections—A, B, C, D. Use thefollowing chart to determine which group(s) ofprocedures are required to perform a scheduledinspection.Inspection Table or ChecklistDaily AQuarterly A + BAnnual A + B + CTwo year A + B + C + DMaintenance TablesThe maintenance tables contained in this sectionprovide summary information on the specificphysical requirements for each inspection.Complete step-by-step instructions for eachscheduled maintenance procedure are provided insection 4, Scheduled Maintenance Procedures.Maintenance Inspection ReportThe maintenance inspection report containschecklists for each type of scheduled inspection.Make copies of the Maintenance InspectionReport to use for each inspection. Storecompleted forms for three years.
