Part No. 34032 Genie S-80 & Genie S-85 4 - 11Service Manual - First Edition Section 4 - Scheduled Maintenance ProceduresTABLE A PROCEDURESA-16Replace the Engine Air FilterEngine specifications require thatthis procedure be performed every100 hours. Perform this proceduremore often if dusty conditionsexist.Maintaining the engine air filter in good condition isessential to good engine performance and servicelife. Failure to perform this procedure can lead topoor engine performance and componentdamage.Perform this procedure with theengine off.1 Remove the end cap from the air cleanercanister.2 Remove the mounting fastener from the airfilter, then remove the filter.3 Clean the inside of the canister and the gasketwith a dry cloth.4 Insert the new filter and replace the mountingfastener.5 Replace the end cap on the canister.Air filters - Genie part numbersFord LSG-423 Engine 27916Deutz F4L 1011 279168 Use a permanent ink marker to write the dateand number of hours from the hour meter onthe oil filter.9 Fill the engine with new oil per specificationsand install the filler cap.10 Start the engine from the ground controls.Allow the engine to run for 30 seconds, thenturn the engine off.11 Check the oil filter and the oil drain hosefor leaks.12 Swing the engine pivot plate back to its originalposition and replace the two retaining bolts.13 Check the engine oil level dipstick. Add oilif needed.Ford Engine LSG-423 5 quartsOil capacity (including filter) 4.7 litersFord Engine LSG-423 Oil viscosity requirementsbelow 60F / 15.5C 5W-30-10 to 90F / -23 to 32C 10W-30above -10F / -23C 10W-40 or 10W-50above 25F / -4C 20W-40 or 20W-50Use oils meeting API classification SG (labeled SG/CCor SG/CD) as they offer improved wear protection.
