2035—Adapter CardsNote: Before removing an adapter card, note the location of theadapter card and cables. When removing an adapter card, install thereplacement card in the same slot as the one you removed. Remove any cables (note location of cables). Remove the adapter card mounting screw (1). Pull out the adapter card (2).(Front)(Top)(Back)(Bottom)AdapterCard 2 1Figure 4-10. Adapter CardsNote: When reinstalling a modem adapter card, ensure the modem WakeUp on Ring cable is connected from the 2-pin keyed connector on themodem to Wake Up on Ring connector on the system board. See “SystemBoard Layout” on page 5-2 for locations.Repair Information 4-9

IBM Aptiva 2159 Manual