IBM Aptiva 2159 Manual

Also see for Aptiva 2159: Hardware maintenance service

Appendix B. Model/Monitor Configurationsand FRU Part NumbersThe models described in this Appendix are Machine Type 2159 machines.Only factory-installed parts are listed.If the machine you are servicing has Machine Type 2159 on the label, butyou cannot find it listed in this appendix, call your local IBM Aptiva ServicerBulletin Board for updated model information (in the U.S., call1-919-248-3540).Table B-2 outlines by model the FRUs that may be ordered by the partnumber indicated. You can find the Machine Type (2159) and Model (-XXX)on the front of the system unit.To determine the correct FRU to install, go to the appropriate country tablelisted below. Then, look across the top of the country table for the FRU youwant to replace. The part number to order is listed by model. Fordescriptions of system boards and parts, see “Parts Catalog” on page 7-1.For IBM monitors sold separately from IBM Aptiva system units, seeTable B-3 on page B-4.Table PageU.S. Machine Type 2159 (SL-A) B-2Japanese Machine Type 2159 (SL-A) B-3Monitor-to-FRU Index B-4 Copyright IBM Corp. 1996 B-1