IBM Aptiva 2159 Manual

Also see for Aptiva 2159: Hardware maintenance service

(continued)005 (continued)(From step 002)DO ANY MESSAGES, ERROR CODES, OR SYMPTOMS APPEAR?Yes No006– Go to Step 008.007– Go to “Index of Symptoms, Messages, Error Codes, or Beeps” onpage 2-9.008(From step 006)– If not already inserted, place the Diagnostics CD in the CD-ROM drive.– Power-off the system unit.– Power-on the system unit, and check for the following responses:1. One short beep2. Readable instructions or Main MenuDID THE SYSTEM PRODUCE THE BEEP AND READABLE SCREEN?Yes No009– Go to “Index of Symptoms, Messages, Error Codes, or Beeps” onpage 2-9.010 If the keyboard responds incorrectly, go to “Keyboard” on page 2-40. If the monitor shows problems, such as jittering, shifting, or being out offocus, go to “Monitor” on page 2-67 and run the Diagnostics tests. If a message or error code is displayed, go to “Index of Symptoms,Messages, Error Codes, or Beeps” on page 2-9.– Select Advanced Diagnostics on the menu.– Select System Info on the menu.– Select Hardware Config on the menu.– Compare the Hardware Configuration Report screen with the actualdevices installed in the system unit.(Step 010 continues)2-6