IBM Aptiva 2159 Manual

Also see for Aptiva 2159: Hardware maintenance service

NoticesReferences in this publication to IBM products, programs, or services do notimply that IBM intends to make these available in all countries in which IBMoperates. Any reference to an IBM product, program, or service is notintended to state or imply that only IBM’s product, program, or service maybe used. Any functionally equivalent product, program, or service that doesnot infringe any of IBM’s intellectual property rights or other legallyprotectable rights may be used instead of the IBM product, program, orservice. Evaluation and verification of operation in conjunction with otherproducts, programs, or services, except those expressly designated by IBM,are the user’s responsibility.IBM may have patents or pending patent applications covering subjectmatter in this document. The furnishing of this document does not give youany license to these patents. You can send license inquiries, in writing, tothe IBM Director of Commercial Relations, IBM Corporation, Purchase, NY10577.Voltage Supply Switch SettingsYour IBM Aptiva Personal Computermight have voltage switches, whichmust be set correctly for your voltage supply. If your monitor or system unithas a voltage switch, complete these steps to make sure each switch is setcorrectly:1. Determine the correct voltage switch setting for your area:2. Locate the voltage switch on the back of your monitor or system unit. Ifthe setting shown on the switch is: Correct, start setting up your IBM Aptiva computer. Incorrect, change the voltage switch setting. (You may need asmall screwdriver.)Voltage SupplyRangeVoltage SwitchSetting100–127 V 115 V or 115200–240 V 230 V or 230 Copyright IBM Corp. 1996 vii