IBM Aptiva 2159 Manual
Also see for Aptiva 2159: Hardware maintenance service
                                                                                                                                                                                                                      |
010 (continued) Check all adapter card cables and connectors for proper installation. Make sure all of the above are set correctly and show the correctvoltages and continuity. Replace any defective cables or adaptercards. See “Power Supply” on page 2-35 and “System Board Layout”on page 5-2.– Run the Easy Test Diagnostics test again.– If an error or other symptom is displayed, go to “Index of Symptoms,Messages, Error Codes, or Beeps” on page 2-9.– If no error can be detected or the symptom is intermittent, go to“Undetermined Problem” on page 2-69.Check Procedures 2-45 |
Related manuals for IBM Aptiva 2159
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine