IBM Aptiva 2159 Manual

Also see for Aptiva 2159: Hardware maintenance service

Table 2-1 (Page 10 of 25). POST and Diagnostics Index forSymptoms, Messages, Error Codes, or BeepsSymptoms, Messages, ErrorCodes, or BeepsAction/FRUNot ready.Printer not on-line or not ready.Ready PrinterPrinterPrinter CableSystem BoardNo 'type-amatic' repeat.At least one repeat key must betested during this test or an errorwill occur. Type-amatic testerror.KeyboardSystem BoardNot used by any standarddevice.IRQ is not currently being usedby a non-standard device.System BoardNumeric Proc Failed.NPU test error.ProcessorSystem BoardParallel Port Failed.Test Report Summary message.System BoardParallel port or serial port failure(system board port).“Diagnostics Device Presence Test” onpage 2-43.Test using a wrap plug while runningDiagnostics.Cable/connectionsSystem boardPass (N): ** Errors ** Drive (X)Failed.Diskette drive read/write testerror.Diskette DriveAccess Station host cardAccess Station client cardAccess Station cableSystem BoardDiskette Drive CablePass (N) Drive Not Ready.Diskette drive door is open ordefective.Ensure diskette drive is ready.Diskette DriveAccess Station host cardAccess Station client cardAccess Station cableSystem BoardDiskette Drive CableCheck Procedures 2-19