IBM Aptiva 2159 Manual

Also see for Aptiva 2159: Hardware maintenance service

Table 2-1 (Page 14 of 25). POST and Diagnostics Index forSymptoms, Messages, Error Codes, or BeepsSymptoms, Messages, ErrorCodes, or BeepsAction/FRUSerial or parallel port devicefailure (adapter port).“Factory-Installed Drive Devices” onpage 2-47Test using a wrap plug while runningDiagnostics. Before testing, ensure serialport A is set to address 3F8 or 3E8,whichever is not used by the Mwave card(modem settings: COMM1=3F8,COMM2=3E8). Set serial port B to address2F8 or 2E8.DeviceCable/connectionsAlternate adapterSystem BoardRiser CardSorry You Need A Mouse.Mouse or mouse driver was notdetected.MouseSystem BoardSound adapter card,factory-installed adapter card, orMwave card software gives aMicrosoft Windows 95 errormessage after POSTconfiguration.Hardware problem occurred.“Diagnostics for Factory-Installed RiserCard, Sound Card, or Adapter Cards NotSupported by Diagnostics CD” onpage 2-53Sound card, adapter card, or Mwave cardconnection/cableSound card, adapter card, or Mwave cardjumper settingsSound card, adapter card, or Mwave cardSystem fails to load theDiagnostics and Utilities softwareSystem preloaded softwareworks correctly.Make sure the CD-ROM drive or diskettedrive is included in the Setup Utility startupsequence.“Factory-Installed Drive Devices” onpage 2-47CD-ROM drive connection/cableCD-ROM driveDiskette drive connection/cableDiskette driveAccess Station host cardAccess Station client cardAccess Station cableSystem BoardCheck Procedures 2-23