IBM Aptiva 2159 Manual

Also see for Aptiva 2159: Hardware maintenance service

(continued)014 (continued)– The Easy Test Diagnostics did not detect a failure. If the system stilldisplays a failure: Check all adapter card jumper settings. Check all adapter card switch settings. Check all adapter card cables and connectors for proper installation. Check Access Station host card for proper installation. Check Access Station client card and cable for proper installation. Make sure all of the above are set correctly and show the correctvoltages and continuity. Replace any defective cables or adaptercards. See “Power Supply” on page 2-35, and “System BoardLayout” on page 5-2.– Run the Easy Test Diagnostics again.– If an error or other symptom is displayed, go to “Index of Symptoms,Messages, Error Codes, or Beeps” on page 2-9.– If no error can be detected or the symptom is intermittent, go to“Undetermined Problem” on page 2-69.2-8