IBM Aptiva 2159 Manual

Also see for Aptiva 2159: Hardware maintenance service

Diagnostics Device Presence Test001DO ANY MESSAGES, ERROR CODES, BEEPS, OR SYMPTOMSAPPEAR?Yes No002Go to Step 004.003Go to “Index of Symptoms, Messages, Error Codes, or Beeps” on page 2-9.If directed here from the Index, go to Step 006.004(From step 002)– Insert the Diagnostics CD into the CD-ROM drive.– Power-off the system unit.– Power-on the system unit, and check for the following responses:1. One short beep2. Main Menu screenDID THE SYSTEM PRODUCE THE BEEP AND MAIN MENU SCREEN?Yes No005– Go to “Index of Symptoms, Messages, Error Codes, or Beeps” onpage 2-9.006(From page 2-47)(From step 003)– Select Advanced Diagnostics on the menu.– Select System Info on the menu.– Select Hardware Config on the menu.– Compare the Hardware Configuration Report screen with the actualdevices installed in the system unit.Note: If necessary, remove the cover and visually compare the devicesinstalled in the system unit to those shown in the HardwareConfiguration Report.Check Procedures 2-43