Out-of-band method: See the IMM2 documentation.For more information about UEFI-compliant firmware, go to http://www-947.ibm.com/support/entry/portal/overview.Automated boot recovery (ABR)Use this information for Automated boot recovery (ABR).About this taskWhile the server is starting, if the integrated management module II detectsproblems with the server firmware in the primary bank, the server automaticallyswitches to the backup firmware bank and gives you the opportunity to recoverthe firmware in the primary bank. For instructions for recovering the UEFIfirmware, see “Recovering the server firmware” on page 150. After you haverecovered the firmware in the primary bank, complete the following steps:Procedure1. Restart the server.2. When the prompt press F3 to restore to primary is displayed, press F3 torecover the primary bank. Pressing F3 will restart the server.Nx-boot failureUse this information for Nx-boot failure.Configuration changes, such as added devices or adapter firmware updates, andfirmware or application code problems can cause the server to fail POST (thepower-on self-test). If this occurs, the server responds in either of the followingways:v The server restarts automatically and attempts POST again.v The server hangs, and you must manually restart the server for the server toattempt POST again.After a specified number of consecutive attempts (automatic or manual), theNx-boot failure feature causes the server to revert to the default UEFI configurationand start the Setup utility so that you can make the necessary corrections to theconfiguration and restart the server. If the server is unable to successfully completePOST with the default configuration, there might be a problem with the systemboard.To specify the number of consecutive restart attempts that will trigger the Nx-bootfailure feature, in the Setup utility, click System Settings > Recovery > POSTAttempts > POST Attempts Limit. The available options are 3, 6, 9, and 255(disable Nx-boot failure).152 System x3650 M4 BD Type 5466: Installation and Service Guide