Appendix B. UEFI/POST error codesUEFI/POST diagnostic error codes can be generated when the server starts orwhile the server is running. UEFI/POST codes are logged in the IMM event log inthe server.For each event code, the following fields are displayed:Event identifierAn identifier that uniquely identifies an event.Event descriptionThe logged message string that appears for an event.ExplanationAdditional information to explain why the event occurred.SeverityAn indication of the level of concern for the condition. The severity isabbreviated in the event log to the first character. The following severitiescan be displayed.Table 16. Event severity levelsSeverity DescriptionInformational An informational message is something that was recorded foraudit purposes, usually a user action or a change of states that isnormal behavior.Warning A warning is not as severe as an error, but if possible, thecondition should be corrected before it becomes an error. Itmight also be a condition that requires additional monitoring ormaintenance.Error An error typically indicates a failure or critical condition thatimpairs service or an expected function.User responseThe actions that you should take to resolve the event.Perform the steps in the order shown until the problem is solved. Afteryou perform all of the actions that are described in this field, if you cannotsolve the problem, contact IBM Support.The following is the list of the UEFI/POST error codes and suggested actions tocorrect the detected problems.© Copyright IBM Corp. 2014 591
