IBM x3250 M3 Problem Determination And Service Manual

Also see for System x3250 M3 Type 4251: Installation and user guide Specifications Datasheet Installation and user guide Installation and user guide

Contents

– POST Event ViewerSelect this choice to enter the POST event viewer to view the POST eventlog.– System Event LogSelect this choice to view the system-event log.– Clear System Event LogSelect this choice to clear the system-event log.v User SecuritySelect this choice to set or clear passwords. See “Passwords” on page 201 formore information.This choice is on the full and limited Setup utility menu.– Power-on PasswordSelect this choice to set a power-on password. See “Power-on password” onpage 201 for more information.– Administrator PasswordSelect this choice to set an administrator password. An administratorpassword is intended to be used by a system administrator; it limits access tothe full Setup utility menu. If an administrator password is set, the full Setuputility menu is available only if you type the administrator password at thepassword prompt. For more information, see “Administrator password” onpage 202.Attention: If you forget the administrator password, you cannot reset thepassword. You must replace the system board.v Save SettingsSelect this choice to save the changes that you have made in the settings.v Restore SettingsSelect this choice to cancel the changes that you have made in the settings andrestore the previous settings.v Load Default SettingsSelect this choice to cancel the changes that you have made in the settings andrestore the factory settings.v Exit SetupSelect this choice to exit from the Setup utility. If you have not saved thechanges that you have made in the settings, you are asked whether you want tosave the changes or exit without saving them.200 IBM System x3250 M3 Types 4251, 4252, and 4261: Problem Determination and Service Guide