IDS X64 Installer Manual

Also see for X64: Training manual User manual User manual Installer manual Manual

Contents

IDS X64 Installer Manual Manual pdf 37 page image

Section: 9IDS X64 Installer Manual 700-398-02D Issued August 2010 37 If the system is armed using the quick stay key [5], the system will report a close by user 131. If the system is armed using the stay arm and go key [6], the system will report a close by user132. If the system is armed by means of the auto arm function, the system will report a close by user133. If the system is armed with the download software, the system will report a close by user 134. These user numbers are hard coded, and they are used when the above actions are reported toa monitoring company. In order for these codes to be report, option 7 in Table 45 needs to be enabled.NOTES ON CONTACT ID:If the panel has been programmed to use Contact ID, it will not be necessary to program individualreporting codes. Provision has been made to enable/disable the reporting of certain groups of codes.Any event that relates to a specific zone, or to a specific user, will have the relevant zone/user numberappended to the end of the Contact ID reporting code.LOCATION 41 Telephone Number 1 Communications Format (default = 5)The value entered into this location selects the primary communication format. Select fromTable 18 the value that corresponds to the required format. During communication, the green LED on thePCB will turn on indicating that the panel has taken the telephone off-hook. If programmed accordingly,the keypad will beep after receiving a handshake from the base station. This indicates a successfultransmission of data. Refer to Table 18 for the available communication formats.[INSTALLER CODE] [*] [4] [1] [*] [COMMUNICATIONS FORMAT] [*]The valid data range is: 0 – 8.NOTE:Refer to section 9.16 Event Reporting Options - Advanced, to see how to enable split reporting.Table 18: Communications Format DataValue Format Name Description0 Ademco Express Dual Tone HS, DTMF1 FBI 4 x 2 (With Parity) 1.8kHz TX, 2.3kHz HS, 40PPS2 FBI 4 x 2 (No Parity) 1.8kHz TX, 2.3kHz HS, 20PPS3 Silent Knight 4 x 2 Fast 1.9kHz TX, 1.4kHz, 20PPS4 Silent Knight 4 x 2 Slow 1.9kHz TX, 1.4kHz, 20PPS5 Contact ID Dual Tone HS, DTMF6 Reserved7 SIA Reporting Bell 103 FSK, HS8 ReservedTX = TransmitHS = HandshakePPS = Pulses per SecondLOCATION 42 Telephone Number 2 Communications Format (default = 5)If dual reporting is enabled then this format will be used to report to phone number 2, whichbelongs to reporting module 1. Refer to Table 18 for the available communication formats.